Transaction of Incers

Browse by Title

	4D Carbon-Carbon Composite Processing and its Properties in Comparison with Other Carbon-Carbon Preforms
	A Comparative Study of Conventional Sintering with Microwave Sintering of High Dielectric Calcium Copper Titanate Nano Powder Synthesized by Sol-Gel Route
	A Hybrid Approach of Partial Least Squared Analysis and Artificial Neural Networks for Predictive Control of a Ceramic Process
	A Model Template for Environmental Management in Ceramic Industry
	A Modified Portland Cement for Dental Use: Its Interaction with Simulated Oral Environment
	A Movement of Art Glass Being Spearheaded by ARTS-GLACERHI in India
	A New High Temperature Resistant Glass-Ceramic Coating Developed in CGCRI, Kolkata
	A New Method for the Analysis of Non-Isothermal Thermo-Analytical Data from Solid State Reaction
	A New Theoretical Model for Development of Damage Tolerant Composites
	A Novel Approach for Synthesis of a Nanocrystalline Yttria Stabilized Zirconia Powder via Polymeric Precursor Routes
	A Short Review on the Pulsed Laser Deposition of Er3+ Ion Doped Oxide Glass Thin Films for Integrated Optics
	A Study on the Solubility Limit of Nd2O3 in ThO2-NdO1.5 Solid Solution
	Advances in Aerogels made by Sonocatalysis
	Advances in Alloy Design of Hardmetals
	Advantages of Nano Pigments Over Micro Pigments in Obtaining Larger Spectra of Colours in CMYK System
	Alumina and Silica Sols as Binders in a Typical ULC Castable
	Alumina-Mullite Composites through Interaction of Bauxite and Fly Ash
	Aluminium Oxide Coating by Microwave Processing
	An Approach towards Theoretical Prediction of Viscosity of Glasses over a Wide Range of Temperature
	Application of Urbain’s Model for Slag Systems in the Estimation of Viscosity of Some Commercial Glasses
	Benefits of Enhanced Mullitization upon Addition of Micronised Andalusite to Low Cement Castables
	Bioceramics — A New Era
	Calcium Sulphate Ceramics for Orthopaedic Applications
	Carbon Nanotubes – Synthesis and Application
	Catalytic Cracking using Nanoporous AlMCM-41 for the Production of Green Fuel
	Ceramic Based Thermal Barrier Coating (TBC) for Gas Turbine Application : Elastic Behaviour of Plasma Sprayed TBC
	Ceramic Education in India : Reality and Requirements
	Ceramic Membranes for the Separation of Carbon Dioxide – A Review
	Ceramic Nanofibers by Electrospinning Technique — A Review
	Ceria Powders by Homogeneous Precipitation Technique
	CGCRI Gives New Life to Jaipur Blue Pottery — A Success Story
	Characterization of Interfacial Layer Between Al2O3-(Ag-Cu-Ti) Active Filler Alloy
	Characterization of Porous Titania and Ceria Ceramics by Small-Angle Neutron Scattering
	Combustible Gas Sensing Characteristics of Chemical Solution Synthesized Nanocrystalline Magnesium Ferrite Spinel Particles
	Comparative Humidity-Sensitive Behaviour of Undoped and Acceptor-doped Barium Stannates
	Comparison between Capillary Suction Time (CST) and Flow Point Measurements for Determination of Highest Achievable Solids Loading in Ceramic Slurries
	Comparison of Two Different Commercially Available Polyacrylate Dispersants for Gelcasting Alumina Slurries
	Comparison of Wear Properties of Alumina-Alumina Articulating Surfaces with Conventional Material Couples Used for Total Hip Arthroplasty
	Compositional Study on Mn-Zn Ferrites for Low Power Loss Applications
	Corrosion Behaviour of Bismuth-Silicate Glasses and their Glass-Ceramic Derivatives and the Effect of Ionizing Gamma-Irradiation
	Corrosion Behaviour of Some Gamma-Irradiated Phosphate Glasses for Radioactive Wastes Burial Applications
	Corrosion Behaviour of Some Industrial Glasses in Various Aqueous Solutions
	Crystallization and Properties of Some Glasses Based on Li-silicates
	Crystallization of Glass Coating By Microwave Heating
	Current and Future Possibilities of Sol-Gel Process
	CVD Grown Materials for High Temperature Electronic Devices : A Review
	Deflocculating Effect of Sodium Polymethacrylates on Aqueous Clay Suspensions
	Defluoridation of Bore Well Water Using Combustion Derived Nanocrystalline Magnesium Oxide
	Determination of Boron in U3O8 by Spectrophotometry
	Determination of Trace Impurities in Silica Sand by Inductively Coupled Plasma Atomic Emission Spectrometry
	Development of a Pneumatic Transport System for Bulk Transfer of Metal Grade Uranium Oxide Powder
	Development of Activated Alumina and its Effect on the Properties of Cement Free Castables Refractories
	Development of Fast Fired Body Using Wollastonite Suitable for Crockeryware
	Development of Materials Research Capabilities in Nigeria
	Development of Sol-Gel Fluorine Doped Tin Oxide Film on Glass
	Diamond and Diamond Like Carbon Films
	Diffuse Phase Transition of Copper Doped Barium Titanate
	DMAIC Approach in Rural Technology — An Application to Making of Water Filters
	Drying Behaviour of Gelcast Green Alumina Parts Utilizing PEG Solution
	Effect of Addition of Titania doped Preformed Spinel in High Alumina Castables
	Effect of Additives on Ceramic Foam Microstructure Processed by Direct Foaming of Aqueous Slurries
	Effect of Adiabatic Flame Temperature on Nano Alumina Powders during Solution Combustion Process
	Effect of Alkali Ions on the Optical Absorption Characteristics of Co2+ ion in Binary Silicate Glasses
	Effect of Calcia on the Densification and Mechanical Properties of Sol-Gel Alumina
	Effect of Cr3+ Substitution for V5+ in Bismuth Vanadate Solid Electrolyte
	Effect of Different Solvents on the Synthesis of -Vanadyl Phosphate and Its Performance as Cathode for Li-ion Battery
	Effect of Grinding on De-Hydroxylation Behaviour of Diaspore
	Effect of Heat Removal on Pore Growth in Nickel-Aluminide during SHS : A Small-Angle Neutron Scattering Investigation
	Effect of Iron Oxide and Silica Doping on Microstructure, Bandgap and Photocatalytic Properties of Titania by Water-in-Oil Microemulsion Technique
	Effect of Nanometric Zirconia-Mullite Precursor on the Properties of Low Cement Castables
	Effect of Particle Size and Sintering Procedure on Microstructure, Dielectric, Ferroelectric and Mechanical Properties of SrBi4Ti4O15
	Effect of Polyvinyl Pyrrolidone on Strength and Some Other Properties of Cement
	Effect of Process Variations on Anticancerous Drug Intercalation in Ceramic Based Delivery System
	Effect of Sm2O3 / ZnO on the Microstructure and Microwave Dielectric Properties of (Zr0.8,Sn0.2)TiO4 Ceramics
	Effect of Temperature on Rheological Behaviour of Alumina Suspension
	Efficient Use of Industrial Solid Waste in Controlling Some Organic Pollutant from Aqueous Environment
	Elastic Constants of Interpenetrating Phase Alumina / Aluminium Composites
	Electrical Discharge Machining of Sintered Ni3Al
	Electrical Porcelain Insulator Technology — An Overview of Indian Scenario
	Electrochemical and Electrokinetic Aspects of Ceramic Nanofiltration Membranes
	Electrophoretic Deposition of 8YSZ on Lanthanum Strontium Manganite Substrates
	Emission Analysis of Rare Earth (Pr3+, Dy3+, Tm3+) Ions doped ZrF4-BaF2-LaF3-YF3-AlF3-NaF Glasses : A Mini-Review
	Environmental and Economic Reforms in the Small Scale Glass Sector of Firozabad through Energy Conservation A Field Experience of Centre for the Development of Glass Industry
	Evaluation of Dry as Well as Thermo-Mechanical Properties of Porcelain Compositions Containing Colloidal Silica as an Additive
	Examination of Industrial Practice of Ceramic Glaze Making with Emphasis on Particle Size Distribution
	Failure Mechanism of Alumino Silicate Refractories in Anode Baking Furnace
	Fibre Reinforced No Cement Self Flow High Alumina Castable : A Study
	Firing Temperatures and Raw Material Sources of Ancient Hittite Ceramics of Asia Minor
	Formation of Boron Carbide Whiskers and Platelets
	Formation of Carbon Free B4C through Carbothermal Reduction of B2O3
	Formulation of Some Frit Compositions for Rapid Once-Fired Wall Tile Glaze
	Functional Ceramic Tiles
	Gallium Nitride : Synthesis and Characterization
	Gas Sensing Properties of ZnO Nanowires
	Gelcasting of Strontium Doped Lanthanum Manganite for Solid Oxide Fuel Cell Applications
	Glass-based Sealants for Application in Planar Solid Oxide Fuel Cell Stack
	Grinding Behaviour of Yttrium Aluminium Garnet Powders Prepared by Solution Combustion Technique
	High Temperature Deformation Behaviour of a High Purity Al2O3 Reinforced with Isolated Second Phases of Spinel (MgAl2O4), YAG (Y3Al5O12) and Zirconia (t-ZrO2)
	Hydration of Cement with Added Vinyl Acetate
	Improved Cordierite Kiln Furniture – Some Studies
	Influence of Additives on Compaction Behaviour of SiC Powders
	Influence of Kaolinitic Clay on the Physico-Mechanical Properties of Common Clay-Fly Ash Mix for Building Bricks
	Influence of Processing Conditions on the Formation of Y2Ti2O7 and YTiO3 Phases
	Influence of SiO2 and Al2O3 Fillers on Thermal and Dielectric Properties of Barium Zinc Borate Glass Microcomposites for Barrier Rib of Plasma Display Panels (PDPs)
	Innovations in Synthesis and Processing of Ceramic Materials
	Institute of Nanotechnology – A Concept Note
	Introduction of Advance Lining System for Tundish at Durgapur Steel Plant
	Investigation of Bioactivity of Silicate Glass-Ceramics in the System SiO2-Na2O-CaO-P2O5 Containing MgO and TiO2
	Investigations on the Utilization of Marble Waste and Fly Ash in Earthenware Wall Tile Composition Part I : Physicochemical Characteristics of Raw Materials
	Ionic Conductivity of Scandia Stabilized Zirconia and Alumina Composites
	Ionic to Electronic Conductivity Studies of Lithium-Borate Ruby-Glass-Ceramics Containing Gold Nano Particles
	Ionic Transport through Heterogeneous Solids
	Kinetics of Non-Isothermal and Isothermal Decomposition of Limestone
	Layered Double Hydroxides Based Ceramic Nanocapsules as Reservoir and Carrier of Functional Anions
	Leachability of Iron Ions from Binary and Ternary Phosphate Glasses
	Leaching Kinetics of Tungstic Acid and in situ Synthesis of Tungsten Carbide in Silica Gel Matrix
	Lead Free Strontium Barium Niobate Ferroelctric Ceramics – A Review on Synthesis, Microstructure and Dielectric Properties
	Machining of Interpenetrating Phase Alumina/Aluminium Composite by Electrical Discharge Technique
	Magnetoresistivity in Solids
	Methods of Synthesis of Y3Al5O12 (YAG) — A Review
	Microcellular Si/SiC Ceramics by Replication of Indian Dicotyledonous Woods
	Microstructural and Mechanical Properties in Traditional Ceramics as a Function of Quartzofeldspathic Sand Incorporation
	Microstructure Characterization and Thermal Expansion Behaviour of Interpenetrating Alumina / Aluminium Composites
	Microwave Sintering of Ceramics, Composites and Metallic Materials, and Melting of Glasses
	Microwave Sintering of Titania
	Modified Design and Lining of Tunnel Kiln for Indian Crockery Industry to Improve Furnace Efficiency
	Nanocrystalline Ceria through Homogeneous Precipitation in Alcohol-Water Mixed Solvent
	Nanocrystalline Titanium Oxide — Its Potential Functional Applications
	NanoFluids – A New Promising Fluid for Cooling
	Nanometal-Glass Hybrid Nanocomposites: Synthesis, Properties and Applications
	Nanosize SnO2 Based Tubular Resistive Gas Sensor for Hydrogen and Acetone Vapour
	Nanostructured Ceramic Materials for Chemical Sensors: Present Status and Future Prospects
	Nanostructured Multiferroics
	New Generation Binders for Refractories and Ceramic Industries
	Novel Glass Polymer Multilayer Composites with High Toughness
	Nuclear Ceramics
	Occluded Gas Content in Fast Breeder Reactor Fuels
	On the Conditions of Synthesis of Nanocrystalline Cadmium Sulphide (CdS) Particles by an Emulsion Technique
	Ophthalmic Lenses for Vision Correction : Review of Application, Usage and Trends
	Optical and Structural Characterization of RE3+ (Eu3+, Sm3+, Dy3+ & Pr3+): BaTiO3 and LiNbO3 Ceramic Powders
	Organophilic Nano Clay: A Comprehensive Review
	Physico-Chemical Characterization of Ukrainian and Indian Plastic Clays — A Comparative Study
	Physicochemical Characteristics of Lanthanum Hydroxide in Hydroxyhydrogel and Conventional Gel Form
	Polyamorphism in Liquids and Amorphous Substances : An Analogue of Polymorphism in Crystalline Solids
	Pore Size and its Distribution for Ca-Hydroxyapatite based Porous Body
	Preparation and Characterization of Porous Cordierite Ceramics with Well-distributed Interconnected Pores
	Preparation of -Al2O3 and to Study of Its Crack Growth Resistance Behaviour
	Preparation of (U0.55Th0.45)O2 Microspheres by Sol-Gel Process
	Preparation of Fine Ceramics by Soft Chemistry
	Preparation of Silica Aerogel by Ambient Pressure Drying Process using Rice Husk Ash as Raw Material
	Preparation of Silica-Molybdenum Carbide Nanocomposite by in situ Reduction
	Preparation of Yttria Stabilized Zirconia Precursor Hydroxy Hydrogel through Co-precipitation and Study of Sintering Process of Calcined Hydrogel
	Production and Characterization of Glasses and Glass-Ceramics from Egyptian Iron Slag Waste
	Putting Colour into Glazes and Enamels
	Rate Controlled Sintering : A Unique Concept for Microstructural Control
	Reaction Processing of Interpenetrating Phase Al2O3/Al Composite : Synthesis, Microstructure and Mechanical Properties
	Reaction-Induced Processing of Al2O3-Based Interpenetrating Phase Composites
	Reaction-Induced Processing of Al2O3-Based Interpenetrating Phase Composites
	Refractories : A Comprehensive Report
	Rehydration Characteristics of Lithium Aluminium Silicon Hydroxy-Hydrogel
	Review on Monolithic Ceramic Catalysts in Different Applications: Support Materials, Incorporation Techniques and Physical Properties
	Rheological Behaviour and Thermo-Mechanical Evaluation of Vitreous Sanitaryware Compositions Containing Fired Sanitary Scrap
	Rheometric Studies on Cordierite-Mullite Precursor Mix for Extrusion of Honeycomb Structures
	Role of Iron Diffusion in Oxynitride Glass – a Mossbauer and EPR Study
	Simplified Aqueous Gelcasting of Silicon Carbide Ceramics
	Sintering and Hardness Characterization of Nanozirconia Tapes
	Sintering Behaviour of Al2O3-ZrO2 Microcomposites Prepared by a Combined Gel-Precipitation Route
	Sintering Behaviour of Al2O3-ZrO2 Microcomposites Prepared by a Combined Gel-Precipitation Route
	Sintering of Mullite Precursor Powder Prepared by Semi-Colloidal Technique
	Sintering Studies of Equimolar MgO-CaO-Al2O3 Mix
	Sintering Studies of Equimolar MgO-CaO-Al2O3 Mix
	Size Effect in Melting : A Historical Overview
	Sliding Wear Characteristics of Biodegradable Nanocomposites of Cellulose Acetate Phthalate and Chitosan Reinforced with Functionalized Nanoclay
	Slow Crack Growth during Static and Dynamic Loading in Silicate Glasses
	Sol-Gel Ceramic Pigments : A Mini-Review on Synthesis, Advantages and Trends
	Sol-Gel Process for Ceramic Nuclear Fuels
	Solid Oxide Fuel Cell Materials : A Review
	Solution Combustion Synthesis and Photocatalytic Activity of -Fe2O3 Nanopowder
	Solution Combustion Synthesis of Calcium Hydroxyapatite Nanoparticles
	Some Studies on the Synthesis and Characterization of Carbon Aerogel
	Strategy for Generation and Management of Intellectual Property in Small and Medium Enterprises (SMEs) with Particular Reference to Glass and Ceramics
	Structural and Magnetic Properties of Strontium Hexaferrite Prepared from Natural Minerals
	Studies on Mechanochemical Mullite Precursor – A Prospective Additive for Castable Refractories
	Studies on the Suitability of Iron-rich Indian Bentonites for Synthesis of Organoclays by Intercalation
	Study on the Formation of Crystalline Phases in Lanthanum Borosilicate Glass
	Study on Wear Phenomena of Tundish Working Lining by Slags of Billet Caster
	Suitability of Different Grades of Fused Magnesia for Magnesia-Carbon Refractories for Critical Applications
	Supercontinuum Generation in Microstructured Silica Optical Fibers : The Formation of Artificial White Light
	Surface Morphology and Dielectric Behaviour of Gd-Doped Ba(Zr0.52Ti0.48)O3 Nanocrystalline Ceramics
	Synthesis and Characterization of Ca1-xSrxZr4(PO4)6 (0 „Tƒnx < 1) Type of NZP Based Low Expansion Ceramics
	Synthesis and Characterization of Nanocrystalline Ce0.9Gd0.1O1.95 by Citrate-Gel Decomposition Technique
	Synthesis and Characterization of CNT Reinforced Alumina based Nanocomposite
	Synthesis and Characterization of Co-Doped Ceria Ceramics by Sol-Gel Method
	Synthesis and Characterization of Nano Silicon Carbide Powder from Agricultural Waste
	Synthesis and Characterization of Nanocrystalline TiO2 Thin Films for Use as Photoelectrodes in Dye Sensitized Solar Cell Application
	Synthesis and Characterization of Pure CdS Nanoparticles for Optoelectronic Applications
	Synthesis and Characterization of Sol-Gel Derived Cu Doped ZnO Films
	Synthesis and Characterization of SrAl2O4:Eu2+, Dy3+ Nanocrystalline Phosphorescent Pigments
	Synthesis of Highly Sinterable Neodymium Ion doped Yttrium Oxide Nanopowders by Microwave Assisted Nitrate-Alanine Gel Combustion
	Synthesis of Mn-Zn Ferrite Nano Particles from Pure Chemicals and Minerals
	Synthesis of Monolithic ZrO2 in a New Polymorph of Orthorhombic Crystal Structure with a Mesoporous Precursor
	Synthesis of Norbergite Fe3BO6 of Single Crystallites from a Borate Glass
	Synthesis of Silicon Carbide Nanofibres Using Simple Chemical Vapour Reaction
	Synthesis of Strontium Hexaferrite Using D-Fructose as a Fuel
	Synthesis of TiC Fibres from TiO2 Containing Raw Materials by Vapour-Liquid-Solid (V-L-S) Growth Method
	Synthesis, Characterization and Catalytic Activities of Titania based Nanocatalysts for the Degradation of Carcinogenic Imidacloprid
	Synthesis, Characterization and Magnetic Properties of Nickel Ferrite by Soft Chemical Method
	Synthesis, Characterization and TL Studies of Porous CaSiO3 Ceramic Powders
	Synthesis, Structural Characterization and Thermoluminescence Properties of -Irradiated Wollastonite Nanophosphor
	Tailoring Porosity and Pore Characteristics in Oxide Ceramic Foams through Controlled Processing
	Tape Cast Porous Nano Alumina Multilayer Composites
	Technological Innovations in Traditional Ceramics with Emphasis on Production of Sanitarywares in the International and Indian Scenario
	The Effect of Atmosphere on the Sintering of Nano-Crystalline ƒÑ-Silicon Carbide Doped with Boron Carbide
	The Microstructure-Property Correlation of Synthetic Granite Tiles Developed from Beach Sand Garnet
	The Microstructure-Property Correlation of Synthetic Granite Tiles Developed from Beach Sand Garnet
	The Present Scenario of Non-Recovery Coke Ovens in India and Development of New Refractory Technology
	The Sonochemical Insertion of Nanomaterials into Mesostructures
	Thermal Shock Resistance of a Special Mullite Based Refractory for Molten Metal Handling Application
	Thermally Stable Ultrafine Au Nanoparticles Embedded in an Anatase Matrix
	Treatment of Graphite for Oxidation Resistant Mag-Carbon Refractories
	Use of Beneficiated Blended Clays in Traditional Ceramics
	Use of Polymeric and other Organic Additives in Ceramic Slurry Processing for Casting — A Review
	Use of Polymeric and other Organic Additives in Ceramic Slurry Processing for Casting — A Review
	Utilization of Fly Ash in the Production of Unglazed Semi-Vitreous Tiles
	UV-Visible and Infrared Spectra of Gamma-Irradiated Transition Metals-Doped Lead Borate Glasses
	UV-Visible and Infrared Spectroscopic Studies of Gamma-Irradiated Transition Metals-Doped Sodium Borate Glasses
	Yttria Dispersion Strengthened Nickel-based Superalloy by Mechanical Alloying